EdgeStar OBR900SS Bedienungshandbuch PDF herunterladen (Seite 8)

Electrical Requirements

ELECTRIC SHOCK HAZARD!

• Plug into a grounded 3-prong outlet.

• Never remove the grounding prong from the plug.

• Never use an adapter to bypass the grounding prong.

• DO NOT use an extension cord.

• Failure to follow these instructions can result in fire,

electrical shock, or death.

dowr

Before you move your outdoor beverage refrigerator into its final location,

it is important to make sure you have the proper electrical connection:

A standard electrical supply (115 V, 60Hz), properly grounded in

accordance with the National Electrical Code and local codes and

ordinances, is required.

It is recommended that a separate circuit, serving only your outdoor

beverage refrigerator, be provided. Use receptacles that cannot be turned

off by a switch or pull chain.

The fuse (or circuit breaker) size should be 15 Amps.

Recommended grounding method

For your personal safety, this appliance must be grounded. It is equipped

with a power supply cord having a 3-prong grounding plug. To minimize

possible shock hazard, the cord must be plugged into a mating 3-pronged

wall socket, and grounded in accordance with the National Electrical

Code and local codes and ordinances. If a mating wall socket is not

available, it is the personal responsibility of the customer to have a

properly grounded, 3-prong wall receptacle installed by a qualified

electrician.

Leveling the outdoor beverage Refrigerator

It is important for the refrigerator to be leveled in order to work properly. It

can be raised or lowered by rotating the plastic sheaths around each of

the feet on the bottom of the machine. If you find that the surface is not

level, rotate the feet until the outdoor beverage refrigerator becomes level

.You may need to make several adjustments to level it. We recommend

using a carpenter's level to check the machine.

1. Place a carpenter's level on top of the product to see if the refrigerator

is level from front to back and side to side.

2. Adjust the height of the feet as follows:

Turn the leveling feet to the right to lower that side of the refrigerator.

Turn the leveling feet to the left to raise that side of the refrigerator.

IMPORTANT: Once you are ready to install it in a cabinet or directly on

the floor, you must adjust the feet to level the outdoor beverage

refrigerator.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

EdgeStar OBR900SS Bedienungshandbuch Seite 8